Best Card Machine for Electricians UK 2026
Updated November 2026
Compare Card Processing Rates & Save
Trusted by 10,000+ UK businesses
Electricians rarely take payment at a fixed till point. You finish a job at a customer's house or on a commercial site, then collect payment on the spot often for amounts between £150 and £800 before moving to the next job. That means your card machine must work reliably on a mobile data connection, hold a full day's charge, and settle funds quickly enough to cover materials on your next call-out.
Key Takeaways
- Most electrician jobs are paid in full at completion, with average transaction values of £150 £800, so a flat-rate percentage fee costs more per job than it would for a low-ticket trade.
- Dojo charges a flat 1.2% blended rate on all UK card transactions for businesses under £100,000 annual card turnover at a £400 job, that is £4.80 per transaction, with no monthly fee surprises.
- SumUp and Square both offer pay-as-you-go plans with no monthly contract, which suits electricians whose card volumes fluctuate with seasonal demand and quiet periods.
- 4G connectivity is non-negotiable on most residential and light commercial sites; battery life of at least eight hours matters because you may take four to six payments across a working day.
- Compare Card Fees is a free, independent advisory service that has helped UK businesses find better card payment deals since 2012. No provider pays to be featured, and recommendations are reviewed at least every three months.
Who Is This Page For?
This page is written for self-employed electricians and small electrical contracting businesses operating in the UK. It covers sole traders doing domestic installations and repairs, small firms running a handful of engineers, and any electrician currently collecting cash or bank transfers who wants to start accepting card payments. If you turn over more than £100,000 a year in card transactions, the bespoke-quote providers lower down are worth your time.
High Transaction Values and Mobile-Only Connectivity: the Two Facts That Drive Your Choice
A typical domestic rewire or consumer unit replacement costs between £500 and £1,500. Even a straightforward fault-finding call-out commonly runs to £150 £300. At those values, a 1.75% fee costs £2.63 on a £150 job but £8.75 on a £500 job. That gap adds up across a week of call-outs. For an electrician doing 20 jobs a month at an average of £350, the difference between a 1.75% rate and a 1.2% rate is roughly £38.50 a month, or around £462 a year.
Connectivity is the other hard limit. Residential properties often have no customer Wi-Fi on offer, and commercial sites rarely give contractors access to the building network. Your card reader must connect via its own 4G SIM not rely on a Bluetooth link to your phone. Both the Dojo Go and SumUp Solo have built-in 4G SIMs. The Square Terminal also has built-in Wi-Fi and can act as a mobile hotspot via a paired phone, though its dedicated 4G option is less established than Dojo's. Battery life on the Dojo Go is rated at around eight hours of active use, which covers most working days without a mid-day charge.
| Provider | Transaction Fee | Monthly Cost | Verdict |
|---|---|---|---|
| Dojo | 1.2% blended on all UK cards (under £100k/yr) | From around £20/month (hardware lease included) | Lowest published flat rate for UK cards saves around £38/month versus 1.75% at £350 average job value across 20 monthly jobs. Built-in 4G SIM and fast next-morning settlement. |
| SumUp | 1.69% pay-as-you-go, or 0.99% on the £19/month SumUp Payments Plus plan | £0 (PAYG) or £19/month (One plan) | The SumUp Solo has a built-in 4G SIM no phone pairing needed on site. The One plan breaks even at around £3,500 monthly card volume, realistic for an active electrician. |
| Square | 1.75% per transaction on UK cards | £0 (card reader £19 one-off) | The cheapest entry point if you take fewer than five or six jobs a month by card. No monthly commitment suits electricians testing card payments for the first time. |
| Zettle | 1.75% per transaction flat rate | £0 (card reader purchase required) | Solid reliability and a clean app, but no built-in 4G SIM on the standard reader phone tethering required on sites without Wi-Fi, which adds a dependency most electricians would rather avoid. |
Our Top Pick for Electricians: Dojo
Dojo is the strongest all-round choice for most UK electricians who take card payments regularly. The 1.2% blended rate on all UK card transactions for businesses under £100,000 annual card turnover is the lowest published flat rate among the mainstream providers. At a typical job value of £350 and 20 jobs a month by card, that is £84 in processing fees versus £122.50 at the 1.75% rate charged by Square and Zettle. Over 12 months, the difference is around £462.
The Dojo Go reader has a built-in 4G SIM, so it works independently on any residential or commercial site without borrowing your phone's data. Settlement arrives in your account by 10pm the same working day in most cases useful when you need to cover materials for the following morning's job. The reader is supplied on a monthly plan rather than as an outright purchase, so there is no large upfront hardware cost.
The honest downside: Dojo does require a contract, typically 12 months, and the monthly plan cost (which includes the hardware) means it is not cost-effective if you only take card payments occasionally. For an electrician doing fewer than 10 card transactions a month, the pay-as-you-go options below may work out cheaper overall. You can read the full Dojo review at our Dojo provider page.
Runner-Up Options
SumUp: Best Pay-As-You-Go Option with Built-In 4G
SumUp is the strongest alternative if you want to avoid a monthly contract. The SumUp Solo reader has a built-in 4G SIM and runs at 1.69% per transaction on the standard pay-as-you-go plan. If your card volume grows past roughly £3,500 a month, the SumUp Payments Plus plan at £19 a month drops the rate to 0.99% per transaction the lowest per-transaction rate available without a bespoke quote. For an electrician taking £4,000 a month by card, that is £39.60 in fees on the One plan versus £67.60 at the standard rate. The reader itself is an outright purchase, so there is no ongoing hardware commitment. Read the full details on our SumUp provider page.
Square: Best for Electricians Starting Out with Card Payments
Square charges 1.75% per UK card transaction with no monthly fee and a one-off reader cost of £19. That is a higher per-transaction rate than Dojo or SumUp Payments Plus, but the total cost at low volumes is minimal. An electrician doing eight card transactions a month at £300 average pays around £42 in fees acceptable for testing whether customers actually want to pay by card before committing to a monthly contract. Square's app also handles invoicing and tipping, which some electricians find useful for jobs quoted upfront. The main limitation is that the standard Square reader connects via Bluetooth to your phone rather than having its own SIM, so you are dependent on your phone's data signal on site. See the Square provider review for full details.
How Compare Card Fees Can Help
Compare Card Fees is a free, independent advisory service that has helped UK businesses find better card payment deals since 2012. We cover around 90% of the UK's leading card payment providers, and no provider pays to be featured every recommendation is based on real conversion data, reviewed at least every three months. We are rated Excellent on Trustpilot. If you want a faster route to the right deal for your electrical business, our team can match you with the most suitable provider based on your actual monthly volume and average job value. Get free quotes from leading UK card payment providers and compare them side by side.
Frequently Asked Questions
Can I get a card machine for a small electrical business?
Yes any UK electrician, including sole traders and newly registered businesses, can apply for a card reader. Square and SumUp both offer same-day sign-up with no credit check, and a Square reader arrives for £19 with next-day delivery in most cases. You do not need a business bank account to apply with either provider, though one helps with faster settlement.
Which card machine is best for a small electrical business?
Dojo is the best value choice for most active electricians taking card payments weekly, thanks to its 1.2% blended rate and built-in 4G SIM. SumUp is the better fit if you want no monthly contract and the option to drop to 0.99% on the One plan once your card volume grows. Square suits electricians just starting out who want to keep upfront costs to under £20.
How do I get a card machine for my electrical business?
Apply directly through the provider's website the process takes around 10 minutes for SumUp or Square. You will need proof of identity, a UK bank account, and basic business details. Dojo requires a 12-month contract and a short sales call. Most accounts are approved within one business day, and hardware typically arrives within two to three working days.
Do I need a separate card machine for each engineer on my team?
Each engineer who collects payment on site needs their own physical reader, but all readers can link to a single business account. SumUp and Dojo both allow multiple readers under one account. SumUp charges per reader purchased; Dojo charges per monthly hardware plan. At £19 per extra SumUp reader, outfitting a two-person team costs £38 upfront with no ongoing hardware fee.
What happens if there is no signal on a job site?
Readers with a built-in 4G SIM the Dojo Go and SumUp Solo switch between networks to find a signal, giving better coverage than a phone tether in weak-signal areas. In a genuine no-signal location, some readers offer offline mode, storing the transaction locally and processing it when connectivity returns. Check your chosen provider's offline policy before relying on it, as not all providers guarantee settlement for offline transactions.
